Calculate aircraft total weight and Center of Gravity (CG). Determine if your loading is within safe operational limits.
Editorially reviewed by the AviCalculator team
Mastering rotational torque moments, longitudinal datum arms, and Center of Gravity (CG) operational envelope compliance.
Aircraft weight and balance planning is the rigorous physical evaluation of an airplane total mass and longitudinal Center of Gravity (CG) location prior to flight departure. In aeronautical engineering, every airframe is certified with two immutable physical boundaries: Maximum Gross Weight (structural loading redline) and the Approved Center of Gravity Envelope (longitudinal balance range). The CG represents the exact three-dimensional balance point where the entire aircraft mass is concentrated.
Adhering strictly to weight and balance limits matters profoundly because violating these boundaries destroys aerodynamic stability and structural airworthiness. Exceeding maximum gross weight overstresses wing spar attachment fittings during turbulent flight gusts. Aerodynamically, an overweight aircraft exhibits higher stall airspeeds, sluggish liftoff rotation, drastically degraded climb rates, and excessive runway braking distances.
Furthermore, improper CG placement is lethal. An excessively forward CG makes the aircraft heavy-nosed, requiring excessive up-elevator deflection that generates massive drag and may leave insufficient elevator authority to flare during landing. Conversely, an aft CG aft of approved limits makes the airplane unstable in pitch. If an aft-loaded aircraft stalls, flat spin recovery becomes aerodynamically impossible because fuselage blanking renders the rudder useless.
Weight and balance calculation relies on rotational physics principles where physical weight multiplied by lever arm distance creates rotational torque (Moment). To derive total aircraft gross weight and exact longitudinal CG, our solver executes these classical mechanical engineering formulas:
Moment = Wt × Arm.Let us calculate a pre-flight loading manifest for a Piper Cherokee 140 four-seat light aircraft preparing for departure.
| Load Station | Weight (lbs) | Arm (in) | Moment (in-lbs) |
|---|---|---|---|
| Basic Empty Airframe | 1,250 | 85.0 | 106,250 |
| Pilot & Front Passenger | 340 | 85.5 | 29,070 |
| Rear Seat Passenger | 170 | 118.1 | 20,077 |
| Usable Fuel (36 Gallons) | 216 | 95.0 | 20,520 |
| Baggage Compartment | 40 | 142.8 | 5,712 |
Total Gross Weight = 2,016 lbsTotal Sum of Moments = 181,629 in-lbsCG Location = 181,629 / 2,016 = 90.09 inches aft of datumResult: Safe Dispatch | Weight Under Max | CG Within LimitsAn aft CG reduces aircraft longitudinal pitch stability by shortening the tail leverage moment arm relative to the CG. If an aft-loaded aircraft enters an aerodynamic stall, the nose tends to pitch further upward rather than dropping automatically. In spin regimes, rudder blanking prevents flat spin recovery.
Because fuel tanks are often located slightly forward or aft of the empty airframe CG, burning fuel inflight reduces total weight and continuously shifts the CG location. Pilots must verify that CG remains inside safe envelope limits for both takeoff ramp weights and depleted landing fuel weights.
Standard aviation gasoline (100LL) weighs exactly 6.0 pounds per gallon under standard atmospheric temperatures. Turbine jet fuel (Jet A) is denser, weighing approximately 6.7 to 6.8 pounds per gallon.
Zero Fuel Weight is the maximum permissible weight of an aircraft loaded with all passengers and cargo but containing zero usable fuel. This limit prevents wing root bending structural overstress.